MOT Status
ExpiredMileage
139,248 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Bearing noise possible front wheel bearing
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Rear fog lamp does not face the rear (4.5.4 (a))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Bearing noise possible front wheel bearing
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Central Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced radiator crossmember (6.1.1 (c) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tow bar mounting area (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced towbar mounting area (6.1.1 (c) (i))
Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced chassis corroded (6.1.1 (a) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill underside corroded (6.1.1 (c) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seat belt mounting area (6.1.1 (c) (i))
Central Prop shaft joint worn, but not excessively (6.1.7 (c) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive chassis (2.4.A.3)
Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive chassis (2.4.A.3)
UNDER BODY HAS JUST BEEN UNDER SEALED
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front tyres showing uneven wear
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Rear Exhaust has a part missing (7.1.1a)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
advise brake warning light on dash
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Front Windscreen wiper blade deteriorated (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P996 VFA is a 2007 Mazda MPV in White with a 1,998cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2007 Mazda MPV models, the average MOT pass rate is 67.0% with a typical mileage of 123,445 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying P996 VFA, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 19 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P996 VFA?
You can check the full history of P996 VFA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P996 VFA registered?
P996 VFA is a 2007 Mazda MPV, first registered on 16 May 2007.
Is P996 VFA safe to buy?
The MOT history for P996 VFA shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P996 VFA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P996 VFA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.