2005 Mazda Bongo

vehicle has been freshly undersealed within all prescribed areas and all prescribed components /under carriage / general

vehicle has general surface corrosion within prescribed areas / under carriage

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Play in steering rack inner joint(s) ()

Vehicle has been under sealed / stone chipped within all prescribed areas under the vehicle / general

corrosion within all prescribe areas

vehicle under sealed within all prescribe areas

Emissions not tested fuel leaking (8.2.2.2 (e))

Front Service brake grabbing severely (1.2.1 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Fuel system component leaking (6.1.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected various areas need attention (5.3.6 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Fuel system component leaking (6.1.3 (b) (i))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner sills (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases front (manifold) (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front under step starting to corrode

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis split (5.3.6 (a) (i))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill back (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under arch/inner wing (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front under step starting to corrode

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis split (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is excessively corroded front crossmember (2.4.A.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Subframe mounting prescribed area is excessively corroded front crossmember (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded front crossmember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill Section/Strong Advise (2.4.A.3)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill Section/Strong Advise (2.4.A.3)

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Rear fog lamp not working (1.3.2b)

Offside Front Front constant velocity joint is slightly worn (2.5.C.1b)

Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)