MOT Status
ExpiredMileage
108,587 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Bumper insecure (6.1.4 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Headlamp aim unable to be tested (4.1.2 (b))
Horn not working (7.7 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Nearside Rear Body mounting fixings insecure Rear mount corroded not attached to body (6.2.2 (c) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Shock absorbers insecurely attached Not attached at the bottom (missing) (5.3.2 (a) (i))
Offside Rear Body mounting fixings insecure Rear mount corroded not attached to body (6.2.2 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement ALL LINK BUSHES CRACKED AND PERRISHED (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Tyre slightly damaged/cracking or perishing BOTH FRONT TYRES (5.2.3 (d) (ii))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Service brake binding but not excessively Both rear wheels (1.2.1 (f))
Rear Tyre slightly damaged/cracking or perishing BOTH REAR TYRES (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis corroded (6.1.1 (c) (i))
Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security step (6.2.2 (d) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Fuel Pipe/s corroded ()
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Fuel Pipe/s corroded ()
Headlamp not working on dipped beam (4.1.1 (a) (ii))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Body has a sharp edge caused by corrosion inner wheel arch (6.1.C.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch (6.1.B.2)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Direction indicator not working both sides (1.4.A.2c)
Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Registration plate lamp not working (1.1.C.1d)
Stop lamp not working all (1.2.1b)
Front number plate damaged
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Vehicle been plated in several places
Vehicle structure has slight corrosion (6.1.A.1)
Front number plate damaged
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front All position lamps not working (1.1.A.3b)
Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear All position lamps not working (1.1.A.3b)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Vehicle been plated in several places
Vehicle structure has slight corrosion (6.1.A.1)
Front number plate slightly damaged
Gearbox oil leak
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Vehicle been plated up in several places
Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Shock absorber has a light misting of oil (2.7.3)
All position lamps not working (1.1.A.3b)
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Exhaust system not adequately supported (7.1.1)
Front Exhaust system not adequately supported (7.1.1)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Windscreen wiper not operating automatically when switched on (8.2.1b)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Front position lamp(s) insecure (1.1.A.3a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear All position lamps adversely affected by the operation of another lamp (1.1.A.3f)
Rear Direction indicators adversely affected by the operation of another lamp (1.4.A.2h)
Rear Electrical wiring damaged and bare wires exposed (1.9.2c)
Rear Electrical wiring deteriorated, likely to cause a short (1.9.2b)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pad(s) wearing thin (3.5.1g)
corrosion to offside outer sills
nearside doors showing corrosion
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Coolant leak
Front Brake pad(s) wearing thin (3.5.1g)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Direction indicators not working (1.4.A.2c)
both front swivel hubs slightly leaking grease
nearside front mirror casing broke
Coolant leak
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Shock absorber has a light misting of oil (2.7.3)
both front swivel hubs slightly leaking grease
nearside front mirror casing broke
Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Stop lamp not working (1.2.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Toyota Land Cruiser?
Based on 446,391 MOT tests across 36,084 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PAG 304A is a 1988 Toyota Land Cruiser in Grey with a 2,446cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 1988 Toyota Land Cruiser models, the average MOT pass rate is 69.4% with a typical mileage of 142,380 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Land Cruiser fails its MOT is brake pipe excessively corroded, accounting for 10,265 recorded failures. If you're considering buying PAG 304A, it's worth having these areas checked by a mechanic before committing.
The Toyota Land Cruiser typically stays on UK roads for around 36 years. At 38 years old, this Toyota Land Cruiser is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PAG 304A?
You can check the full history of PAG 304A by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PAG 304A registered?
PAG 304A is a 1988 Toyota Land Cruiser, first registered on 30 December 1988.
Is PAG 304A safe to buy?
The MOT history for PAG 304A shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PAG 304A have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PAG 304A. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.