MOT Status
ExpiredMileage
72,344 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Oil leak
off side front shocker bracket bolt missing
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Rear fog lamp not working (1.3.2b)
Rear fog lamp switch missing (1.3.1a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
off side front shocker bracket bolt missing
Front Vehicle structure has slight corrosion (6.1.B.2)
Vehicle structure has slight corrosion (6.1.B.2)
Hazard warning switch faulty (1.4.B.1d)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Body has a sharp edge caused by corrosion (6.1.C.1)
Centre Brake pipe excessively corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside rear brake binding (3.7.B.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Horn not working (1.6.2a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low and too far to the left. (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Sub-frame synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low and too far to the left. (1.8)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Austin Morris Mini City?
Based on 4,981 MOT tests across 672 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PBW 148W is a 1981 Austin Morris Mini City in Red with a 998cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 1981 Austin Morris Mini City models, the average MOT pass rate is 66.1% with a typical mileage of 55,006 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Morris Mini City fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 547 recorded failures. If you're considering buying PBW 148W, it's worth having these areas checked by a mechanic before committing.
The Austin Morris Mini City typically stays on UK roads for around 47 years. At 45 years old, this Austin Morris Mini City is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PBW 148W?
You can check the full history of PBW 148W by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PBW 148W registered?
PBW 148W is a 1981 Austin Morris Mini City, first registered on 14 May 1981.
Is PBW 148W safe to buy?
The MOT history for PBW 148W shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PBW 148W have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PBW 148W. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.