2003 Kia Sorento

Central Front Prop shaft flexible coupling slightly deteriorated rear shaft front UJ (6.1.7 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Passenger seat(s) missing at time of test all rear seats ()

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pedal anti-slip provision missing (1.1.2 (c))

Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Central Front Prop shaft flexible coupling slightly deteriorated rear shaft front UJ (6.1.7 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Passenger seat(s) missing at time of test all rear seats ()

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Anti-roll bar linkage insecurely attached drop link (5.3.3 (a) (i))

Offside Front Brake pedal anti-slip provision missing (1.1.2 (c))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe slightly damaged (1.1.11 (c))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both NS & OS (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear wheel has restricted movement

Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both NS & OS (5.2.3 (e))

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rearmost bush (2.4.G.2)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed (6.1.B.2)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed (6.1.B.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded upper tie rod to axle (2.4.A.3) DANGEROUS

Nearside Rear Tie bar/rod attachment bracket/mounting corroded and its strength is seriously reduced axle bracket (2.4.G.1) DANGEROUS

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded tie rod to axle (2.4.A.3) DANGEROUS

Offside Rear Upper Tie bar/rod attachment bracket/mounting corroded and its strength is seriously reduced bracket to axle (2.4.G.1) DANGEROUS

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside and Offside rear and rear upper spring mounting areas heavy surface corrosion

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rearmost wishbone bush (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)

Nearside door mirror cracked

Offside Front Brake pad(s) wearing thin (3.5.1g)

both rear spring mounts showing signs of advancing surface corrosion

rear chassis showing signs of surface of surface corrosion

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)

Nearside door mirror cracked

Offside Front Brake pad(s) wearing thin (3.5.1g)

both rear spring mounts showing signs of advancing surface corrosion

rear chassis showing signs of surface of surface corrosion

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

front prop shaft missing

fuel tank slightly corroded

offside rear bumper mount corroded away, bumper still secure

rear metal fuel pipes corroded

surface corrosion to front and rear chassis/suspension parts

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

front prop shaft missing

fuel pipe in centre of vehicle crushed/slightly damaged, not leaking

fuel tank slightly corroded

offside rear bumper mount corroded away, bumper still secure

rear metal fuel pipes corroded

spare tyre flat

surface corrosion to front and rear chassis/suspension parts

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint has slight play (2.2.B.1f)