2004 Honda CBR125R

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Riders seat insecure (6.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Nearside clutch lever mounting broken

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

heat shield guard 1 mounting bolt rotted

Drive chain slightly tight (6.2.1d)

Exhaust slightly deteriorated (7.1.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

gear linkage worn

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Headlamp aim too high (1.6)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain slightly tight (6.2.1d)

Exhaust slightly deteriorated (7.1.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

gear linkage worn

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Tyre worn close to the legal limit (4.1.3(ii))