2008 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Hazard warning switch faulty (4.4.2 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement axle (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides , sub frame mountings (5.3.6 (a) (i))

Hazard warning switch faulty visual tell tale not working (4.4.2 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Body component damaged and likely to cause injury lens cluster (6.2.1 (a) (i))

Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides , sub frame mountings (5.3.6 (a) (i))

Hazard warning switch faulty visual tell tale not working (4.4.2 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front brake hose not in clip

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bay (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near axle mount (5.3.6 (a) (i))

Nearside Front brake hose not in clip

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis Member @ Rear Exhaust Mounting Point (6.1.1 (c) (i))

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Nail in offside rear tyre

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp insecure (1.1.C.1c)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nail in offside rear tyre

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

o/s/f wheel arch linner damaged and insecure

rear bumper damaged

Nearside Stop lamp not working (1.2.1b)

Registration plate lamp insecure (1.1.C.1c)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

o/s/f wheel arch linner damaged and insecure

rear bumper damaged

Front bumper insecure

Wheelarch covers fitted//front o/s wheelarch cover hanging off

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front bumper insecure

Wheelarch covers fitted//front o/s wheelarch cover hanging off