MOT Status
ValidMileage
87,078 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
rear centre stop light not working
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
rear centre stop light not working
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened SUBFRAME (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened SUBFRAME (5.3.3 (b) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Headlamp lens slightly defective Both Front (4.1.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar has slight play in a ball joint DROP LINK (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PE09 BCZ is a 2009 Hyundai I10 in Red with a 1,248cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2009 Hyundai I10 models, the average MOT pass rate is 76.7% with a typical mileage of 43,653 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying PE09 BCZ, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 17 years old, this Hyundai I10 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PE09 BCZ?
You can check the full history of PE09 BCZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PE09 BCZ registered?
PE09 BCZ is a 2009 Hyundai I10, first registered on 1 March 2009.
Is PE09 BCZ safe to buy?
The MOT history for PE09 BCZ shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PE09 BCZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PE09 BCZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.