2005 Mazda 6

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively plus o/side (1.2.1 (f))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all n/side and o/side arm bushes (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all rear suspension mounts corroded (6.1.1 (c) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Brake insecure calliper bolt (1.1.21 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Parking brake inoperative on one side low reading no lock out (1.4.1 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively plus o/side (1.2.1 (f))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all n/side and o/side arm bushes (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all rear suspension mounts corroded (6.1.1 (c) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced plus o/side inner sills (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated outer boot has a small split (6.1.7 (g) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake disc worn, but not excessively plus o/side are corroded (1.1.14 (a) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced plus o/side inner sills (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated outer boot has a small split (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake hose excessively damaged (1.1.12 (b) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Parking brake inoperative on one side little effort (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front of two (5.3.4 (b) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

both inner sills corroded but not excessively

sill covers fitted obscuring some parts of the sill

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit Inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit Inner edge (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nail in offside front tyre