MOT Status
ExpiredMileage
160,651 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced AND OUTER SILL AREA (6.1.1 (c) (i))
Rear EXHAUST HEAT SHIELD LOOSE
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
UNDER COVERS FITTED
Offside Rear Brake hose leaking on an air braking system (1.1.12 (c) (i))
Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced AND OUTER SILL AREA (6.1.1 (c) (i))
Rear EXHAUST HEAT SHIELD LOOSE
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
UNDER COVERS FITTED
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sill area (6.2.2 (d) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp aim too low (4.1.2 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides and o/s r has a hole (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
eml on
n/s/f washer jet blocked
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
eml on
n/s/f washer jet blocked
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Rear Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
How Reliable is the Audi A3?
Based on 7,415,025 MOT tests across 593,922 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PE57 XXB is a 2007 Audi A3 in Grey with a 1,984cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2007 Audi A3 models, the average MOT pass rate is 75.3% with a typical mileage of 93,100 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 173,142 recorded failures. If you're considering buying PE57 XXB, it's worth having these areas checked by a mechanic before committing.
The Audi A3 typically stays on UK roads for around 29 years. At 19 years old, this Audi A3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PE57 XXB?
You can check the full history of PE57 XXB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PE57 XXB registered?
PE57 XXB is a 2007 Audi A3, first registered on 1 September 2007.
Is PE57 XXB safe to buy?
The MOT history for PE57 XXB shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PE57 XXB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PE57 XXB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.