2008 Chrysler-jeep Patriot

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Parking brake efficiency only just met. it would appear that the braking system requires adjustment or repair.

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Underseal applied under vehicle

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Parking brake efficiency only just met. it would appear that the braking system requires adjustment or repair.

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Underseal applied under vehicle

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brake disc contaminated (1.1.14 (b))

Rear Sub-frame corroded and seriously weakened on the upper side of the subframe, upon further inspection, the subframe has been completely deteriorated (5.3.3 (b) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced entirety of under body covered in corrosion. (6.1.1 (c) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brake disc contaminated (1.1.14 (b))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced entirety of under body covered in corrosion. (6.1.1 (c) (i))

Offside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

underbody corrosion

Electronic stability control warning lamp indicates a fault (7.12 (e))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

underbody corrosion

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Electronic braking system warning device indicates a fault (1.7 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

Play in steering rack inner joint(s) both ()

under covers fitted

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

Play in steering rack inner joint(s) both ()

under covers fitted

Nearside Rear Tyre worn close to the legal limit 2mm also cracking up slightly on sidewalls (4.1.E.1)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Tyre worn close to the legal limit 2mm also cracking up slightly on sidewalls (4.1.E.1)

under covers fitted

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Nearside Rear Tyre worn close to the legal limit 2mm also cracking up slightly on sidewalls (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2mm also cracking up slightly on sidewalls (4.1.E.1)

under covers fitted

nearside steering rack inner joint worn slightly

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

nearside steering rack inner joint worn slightly

engine cover and under tray fitted

Offside Front Headlamp not working on dipped beam (1.7.5a)

engine cover and under tray fitted

Items removed from driver's view prior to test

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)