2010 Nissan Micra

Central Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Central Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Electrical wiring inadequately secured cable loose and fouling steering column under dashboard (4.11 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front anti roll bar linkage slight play

Offside Front anti roll bar linkage sllght play

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% (1.2.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Headlamp aim projected beam image is obviously incorrect bulb insecure (4.1.2 (c))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% (1.2.1 (b) (i))

Exhaust silencer insecure back box clamp (8.1.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)