2010 Honda Civic

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

Offside Front Inner Play in steering rack inner joint(s)

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Suspension arm pin or bush excessively worn trailing arm bushes (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

heat shield loose o/s/r

Rear Suspension arm pin or bush excessively worn trailing bushes both sides (5.3.4 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

heat shield loose o/s/r

Front Tyre worn close to legal limit/worn on edge x2 (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Tyre worn close to legal limit/worn on edge x2 (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Position lamp not working (4.2.1 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to the legal limit worn 2mm (4.1.E.1)

Nearside Side repeater not working (1.4.A.2c)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit worn 2mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Side repeater has less than 50% of the light sources illuminating (1.4.A.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

rear brake application uneven (3.7.B.2)