2013 Sym Jet

Rear tyre starting to crack

Road spring corroded (5.3.1 (b) (i))

Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear brake lever has limited reserve travel.

Headlamp aim too high (4.1.2 (a))

Horn not working (7.7 (a))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear brake lever has limited reserve travel.

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Fuel cap seal starting to split.

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Fuel cap seal starting to split.

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Front tyre cracking in sidewalls.

Rear Road spring corroded (5.3.1 (b) (i))

brake flexes run through plastic sleeves

Central Front Mudguard insecure split damaged mudguard ()

Central Front Tyre worn close to the legal limit (5.2.3 (e))

Central Front Wheel corroded but not to excess (5.2.2 (c) (i))

Central Rear Mudguard insecure ()

Central Rear Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Fuel cap seal starting to crack.

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Brake lever pivot excessively worn (1.1.1 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps and will show white light to rear when working (4.7.1 (b) (ii))

Front Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Fuel cap seal starting to crack.

Brake lever pivots slightly worn (3.1.3a)

brake hoses in sleeves

rear tyre cracking in sidewall

Front Brake lever pivots slightly worn (3.1.3a)