MOT Status
ExpiredMileage
199,969 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced across an axle (3.7.B.5b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high and too far to the left. (1.8)
Offside Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front front brake binding (3.7.B.1) DANGEROUS
Coolant leak ()
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front wheel bearing not tested
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
o/s/r and n/s/r inner wheel arches not tested for corrosion, covers fitted
Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt forward (2.2.C.1c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp levelling device obviously defective (1.7.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp insecure (1.7.3)
Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm worn but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm worn but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm worn but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front of both sills corroded not in prescibed area
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust system not adequately supported (7.1.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PF05 VFL is a 2005 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying PF05 VFL, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PF05 VFL?
You can check the full history of PF05 VFL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PF05 VFL registered?
PF05 VFL is a 2005 Mazda 6, first registered on 31 May 2005.
Is PF05 VFL safe to buy?
The MOT history for PF05 VFL shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PF05 VFL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PF05 VFL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.