2006 Fiat Ducato

Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arches covered in underseal (5.3.6 (a) (i))

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front both sills holed out side prescribed area

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Leaf spring shackle bracket corroded but not seriously weakened both sides (5.3.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both chassis rails undersealed (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides inner wings undersealed (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Leaf spring shackle bracket corroded but not seriously weakened both sides spring hangers (5.3.1 (b) (i))

Front Lower Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive spring hangers (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Engine sump pan corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Offside performance not as effective as Nearside (1.2.1 (b) (i))

Many parts of underside and suspension components corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis to cross member very corroded (6.1.1 (c) (i))

Suspension component corroded but not seriously weakened many suspension parts corroded (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced lots of surface corrosion to much of the chassis (6.1.1 (c) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Many parts of underside surface corrosion

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside rear brake binding (3.7.B.1)

Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

osr brake is binding slightly

Nearside Rear rear brake binding (3.7.B.1)

Stop lamp not working (1.2.1b)

1/7 leds inop in high level brake light

3 exhust rubbers split and perished

front wipers slightly smearimg w/s and split on edges

n/s side marker light inop

o/s side marker light inop

Stop lamp deteriorated, but still visible from a reasonable distance (1.2.1d)

all 3 rubber exhaust mountings perished

both n/s/and o/s/front side marker lights innop

o/s/rear wheel slight brake bind

O/S, front side marker light inoperative

One segment of Hi-Level brake light inoperative

Three exhaust rubber mounts perished

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

O/S, front side marker light inoperative

One segment of Hi-Level brake light inoperative

Three exhaust rubber mounts perished