MOT Status
ExpiredMileage
66,716 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Obligatory mirror insecure (3.3 (b) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Non obligatory mirror damaged ()
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Non obligatory mirror damaged ()
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule all pipes (1.1.12 (f) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake hose has slight corrosion to ferrule all pipes (1.1.12 (f) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Marked (6.2.2 (d) (i))
Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Axle corroded
Front brake disce corded
Offside Rear inner wheel arch inner corrded
Rear sub fraim bush week
wheel rim bent osf osr
wheel rim bent osf osr
Front brake disce corded
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear inner wheel arch inner corrded
Rear sub fraim bush week
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front tyre has a slight flat spot
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge slightly on the inner (5.2.3 (e))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front tyre has a slight flat spot
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge slightly on the inner (5.2.3 (e))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc's worn and corroded
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Front brake disc's worn and corroded
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Vehicle structure has slight corrosion (6.1.A.1)
Nail in nearside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nail in nearside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nail in nearside front tyre
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle's internal headlight adjuster altered to recheck lights
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PF08 DPO is a 2008 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying PF08 DPO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PF08 DPO?
You can check the full history of PF08 DPO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PF08 DPO registered?
PF08 DPO is a 2008 Ford Ka, first registered on 19 June 2008.
Is PF08 DPO safe to buy?
The MOT history for PF08 DPO shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PF08 DPO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PF08 DPO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.