MOT Status
ExpiredMileage
109,921 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
Nearside Front position lamp(s) slightly discoloured (1.1.A.3e)
Offside Front position lamp(s) slightly discoloured (1.1.A.3e)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
Nail in offside rear tyre
Nearside Front position lamp(s) slightly discoloured (1.1.A.3e)
Offside Front position lamp(s) slightly discoloured (1.1.A.3e)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
drivers seat movement in mountings requires deeper investigation
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
abs working at low speed on roadtest (both front rings cracked)
some noise from n/s/r wheel bearing
Nearside rear brake binding (3.7.B.1)
1x front to rear brake pipe corroded
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the MG ZS?
Based on 361,123 MOT tests across 38,682 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PF51 CNC is a 2001 MG ZS in Blue with a 1,796cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2001 MG ZS models, the average MOT pass rate is 69.1% with a typical mileage of 69,047 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG ZS fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 14,838 recorded failures. If you're considering buying PF51 CNC, it's worth having these areas checked by a mechanic before committing.
The MG ZS typically stays on UK roads for around 25 years. At 25 years old, this MG ZS is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PF51 CNC?
You can check the full history of PF51 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PF51 CNC registered?
PF51 CNC is a 2001 MG ZS, first registered on 27 December 2001.
Is PF51 CNC safe to buy?
The MOT history for PF51 CNC shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PF51 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PF51 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.