MOT Status
ValidMileage
92,514 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Suspension rod ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Suspension rod ball joint has slight play (5.3.4 (a) (i))
vehicle has corrosion front and rear underneath
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Inner Suspension rod ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Suspension rod ball joint has slight play (5.3.4 (a) (i))
vehicle has corrosion front and rear underneath
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear axle corroded
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
front and rear suspension and mounting areas corroded but not to excess
Horn not working (7.7 (a))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
front and rear suspension and mounting areas corroded but not to excess
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Seeping grease (2.1.3 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive Gearbox (8.4.1 (a) (i))
Sills corroded. Both sides
Various underbody corrosion
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust mounting defective Rubber split but exhaust still secure (6.1.2 (a))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both bushes worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
underside of car rusty
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Coil spring corroded all 4 sprayed with under seal (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
front screen stone chipped
under body & metal brake pipes heavily sprayed with under seal
Horn not working (7.7 (a) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Coil spring corroded all 4 sprayed with under seal (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
front screen stone chipped
under body & metal brake pipes heavily sprayed with under seal
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Exhaust centre pipe rubber mount split but exhaust is still supported
Front Brake pad(s) wearing thin 3mm (3.5.1g)
Items removed from driver's view prior to test Items hanging from rear view mirror
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill (6.1.B.2)
Exhaust centre pipe rubber mount split but exhaust is still supported
Front Brake pad(s) wearing thin 3mm (3.5.1g)
Items removed from driver's view prior to test Items hanging from rear view mirror
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake pipe excessively corroded Both front to rear (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Seat belt anchorage prescribed area is excessively corroded Nearside floor to sill (5.2.6)
Seat belt anchorage prescribed area is excessively corroded Offside floor to sill (5.2.6)
Suspension component mounting prescribed area is excessively corroded Nearside front inner wing (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded Offside front inner wing (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake pipe excessively corroded both front to rear (3.6.B.2c)
Brake pipe excessively corroded nearside rear x2 (3.6.B.2c)
Brake pipe excessively corroded offside rear x1 (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp not working on main beam (1.7.5a)
Seat belt anchorage prescribed area is excessively corroded nearside and offside front floor (5.2.6)
Suspension component mounting prescribed area is excessively corroded nearside and offside front inner wheel arches (2.4.A.3)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
centre and rear exhaust rubbers perished
engine has an oil leak
offside front inner arch cover damaged
vehicle underbody corroded
Under vehicle general corrosion.
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Horn not working (1.6.2a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Seat belt retracting mechanism defective (5.2.5b)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
front b/discs poor condition
Front Brake pad(s) wearing thin (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
front brake discs badly corroded inners
nsf tyre mis-shaped
Front Brake pad(s) wearing thin (3.5.1g)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
front brake discs badly corroded inners
nsf tyre mis-shaped
Front brake disc excessively pitted (3.5.1h)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
How Reliable is the Daihatsu Copen?
Based on 38,710 MOT tests across 2,415 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PF53 ETR is a 2003 Daihatsu Copen in Black with a 659cc petrol engine. This vehicle has been through 34 MOT tests with a personal pass rate of 58.8%.
Across all 2003 Daihatsu Copen models, the average MOT pass rate is 77.8% with a typical mileage of 46,246 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daihatsu Copen fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 717 recorded failures. If you're considering buying PF53 ETR, it's worth having these areas checked by a mechanic before committing.
The Daihatsu Copen typically stays on UK roads for around 23 years. At 23 years old, this Daihatsu Copen is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PF53 ETR?
You can check the full history of PF53 ETR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PF53 ETR registered?
PF53 ETR is a 2003 Daihatsu Copen, first registered on 6 December 2003.
Is PF53 ETR safe to buy?
The MOT history for PF53 ETR shows 34 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PF53 ETR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PF53 ETR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.