2005 Rover 25

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Coolant leak ()

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive & outer sill (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases middle section (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

slight play in steering rack inner joints

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Ball joint has slight play (2.2.B.1f)

Offside Front Ball joint has slight play (2.2.B.1f)

Centre Stop lamp not working (1.2.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)