MOT Status
ExpiredMileage
121,560 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side axle area (6.2.2 (d) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Exhaust system insecure (6.1.2 (a))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side axle area (6.2.2 (d) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
corrosion under vehicle and on suspension parts
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sub frame (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced sub frame (6.1.1 (a) (i))
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
corrosion under vehicle and on suspension parts
Nearside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Upper Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle location arm forward mounting. (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle location arm / forward mounting. (5.3.6 (a) (i))
Front Sub-frame likely to fail (5.3.3 (b) (ii)) DANGEROUS
Offside Front Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected suspension arm/rear mounting. (5.3.6 (a) (ii)) DANGEROUS
Offside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected steering rack mounting. (2.1.2 (e) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced includes vehicle floors n/s and o/s. (6.1.1 (c) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear pin/bush. (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted outer rim. (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn inner tread/ tread depth h3.1mm (5.2.3 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear pin/bush. (5.3.4 (a) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Tyre worn close to legal limit/worn on edge worn inner edge/tread depth 3.1mm (5.2.3 (e))
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Suspension component corroded but not seriously weakened axle. (5.3.3 (b) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear axle surface corrosion.
Vehicle structure is corroded but structural rigidity is not significantly reduced including under sills and floor. (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting. (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting. (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear axle surface corrosion.
Vehicle structure is corroded but structural rigidity is not significantly reduced including under sills and floor. (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle location mounting. (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle location mounting. (5.3.6 (a) (i))
Central Front Exhaust system insecure (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle location mounting. (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle location mounting. (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting. (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting. (5.3.6 (a) (i))
rear axle casing slightly corroded.
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting. (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting. (5.3.6 (a) (i))
rear axle casing slightly corroded.
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PF55 UNB is a 2006 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying PF55 UNB, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PF55 UNB?
You can check the full history of PF55 UNB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PF55 UNB registered?
PF55 UNB is a 2006 Peugeot 107, first registered on 28 January 2006.
Is PF55 UNB safe to buy?
The MOT history for PF55 UNB shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PF55 UNB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PF55 UNB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.