2006 Land Rover Range Rover

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Both rear inner sills (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Emissions unable to be completed Over heating (8.2.1.2 (d))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Both rear inner sills (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both rear inner sills (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Arm rear bush (5.3.4 (a) (i))

Nearside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing 1.8mm (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing 2mm (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing Both front 3mm (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Central Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever worn, but not excessively (1.1.6 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust catalytic converter obviously modified (8.2.1.1 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Inner Oil leak /oil leak residue

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement lower (2.4.G.2)

Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement lower (2.4.G.2)

Offside Rear Inner differential oil misting

Fuel cap/sealing device sealing washer deteriorated (7.2.4c)

Nearside Front Inner Oil leak /oil leak residue

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement lower (2.4.G.2)

Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement lower (2.4.G.2)

Offside Rear Inner differential oil misting

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

offside rear wheel slightly stiff to rotate.

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)