2002 Lexus SC430

Central Front Exhaust has a minor leak of exhaust gases both side (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides pitted (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides pitted (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

gearbox leak

oil leak

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear floor at rear sub mount (6.2.2 (d) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Central Front Exhaust has a minor leak of exhaust gases both side (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides pitted (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides pitted (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

gearbox leak

oil leak

Nearside Front Headlamp levelling device inoperative sensor snapped (4.1.5 (a))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch holed (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened front and rear discs pitted from standing (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear archliners fitted - corrosion around liners

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

underbody corrosion to all suspension components

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced inner sill to floor (6.1.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Non obligatory mirror damaged

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Offside Front Body component insecure Body stiffening bar (6.2.1 (a) (i))

Offside Front Oil leaking excessively from engine (8.4.1 (a) (i))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust is secure, but n/s and o/s flanges are missing

Internal headlamp adjuster light is displayed

Nearside Front Brake disc backing cover missing

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Rear n/s and o/s brake disc backing covers missing

Various corroded areas under vehicle

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / brace mount (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front brake disc backing plate missing

Nearside Front subframe brace / stabliser corroded but not a load bearing component

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear tyre deteriorated and splitting

Oil leak, but not excessive (8.4.1 (a) (i))

internal headlight adjuster light is displayed

offside and nearside exhaust flanges are missing but system is still secure

offside and nearside rear brake disc backing plates missing

tpml flashing

various corroded areas underneath vehicle

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust has a minor leak of exhaust gases (7.1.2)

under tray fitted

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Side repeater not working (1.4.A.2c)

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)