MOT Status
ValidMileage
109,951 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension arm corroded but not seriously weakened both front lower (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bush (5.3.4 (a) (i))
Suspension rod corroded but not seriously weakened both rear panhard rod (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both front upper [inner wing] (5.3.6 (a) (i))
both front headlamps deteriorated but not affecting beam image
rear suspension beam corroded
rear tow bar corroded
slight oil leak from engine area
slight play in n/s front inner steering but not detected at steering wheel
underside of vehicle and components covered with black wax
Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Direction indicator incorrect colour n/s and o/s rear (4.4.3 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension arm corroded but not seriously weakened both front lower (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bush (5.3.4 (a) (i))
Suspension rod corroded but not seriously weakened both rear panhard rod (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both front upper [inner wing] (5.3.6 (a) (i))
both front headlamps deteriorated but not affecting beam image
rear suspension beam corroded
rear tow bar corroded
slight oil leak from engine area
slight play in n/s front inner steering but not detected at steering wheel
underside of vehicle and components covered with black wax
Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension arm corroded but not seriously weakened both front (5.3.3 (b) (i))
Suspension rod corroded but not seriously weakened both rear panhard (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both front upper inner wing (5.3.6 (a) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both rear upper (5.3.6 (a) (i))
Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))
rear suspension beam corroded
slight oil leak from engine
rear suspension beam corroded
slight oil leak from engine
Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension arm corroded but not seriously weakened both front (5.3.3 (b) (i))
Suspension rod corroded but not seriously weakened both rear panhard (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both front upper inner wing (5.3.6 (a) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both rear upper (5.3.6 (a) (i))
Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension rod corroded but not seriously weakened both rear panhard rod (5.3.3 (b) (i))
rear suspension beam corroded.
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension rod corroded but not seriously weakened both rear panhard rod (5.3.3 (b) (i))
rear suspension beam corroded.
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension rod corroded but not seriously weakened both rear pahard rod (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both rear upper (5.3.6 (a) (i))
rear suspension beam corroded.
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension rod corroded but not seriously weakened both rear pahard rod (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both rear upper (5.3.6 (a) (i))
rear suspension beam corroded.
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension rod corroded but not seriously weakened both rear panhard rod (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both front (5.3.6 (a) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive both rear (5.3.6 (a) (i))
rear suspension beam corroded.
rear tow bar corroded.
slight play n/s front inner steering rack
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Bonnet primary retaining device ineffective (3.1 (c))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Windscreen washer not working (3.5 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Windscreen washer not working (3.5 (a))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake performance not tested (3.7.A.1)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Inner brake disc modified but not seriously weakened (3.5.1n)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Fuel cap/sealing device sealing washer missing (7.2.4c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Inner Seat belt insecurely fixed to the seat (5.2.1a)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Road wheel badly damaged (4.2.A.1a)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Rear fog lamp not working (1.3.2b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside Rear Rear fog lamp not working (1.3.2b)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PIL 5046 is a 2005 Vauxhall Vivaro in Silver with a 1,870cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 60%.
Across all 2005 Vauxhall Vivaro models, the average MOT pass rate is 65.8% with a typical mileage of 107,499 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying PIL 5046, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 21 years old, this Vauxhall Vivaro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PIL 5046?
You can check the full history of PIL 5046 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PIL 5046 registered?
PIL 5046 is a 2005 Vauxhall Vivaro, first registered on 30 June 2005.
Is PIL 5046 safe to buy?
The MOT history for PIL 5046 shows 30 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PIL 5046 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PIL 5046. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.