1990 Ford Transit

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step (7.1.1 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step (7.1.1 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both front drop link rubbers (2.4.G.2)

Front Ball joint has slight play both rack end inner ball joints (2.2.B.1f)

Front Front wheel bearing has slight play both wheel bearings slight play (2.5.A.3c)

Front oil wetness under engine and steering rack

Front unable to see front brake pads

Nearside Rear lens deteriorated

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mount (2.4.A.3)

Offside Front tyre inner shoulder wear

Offside Rear slight brake binding

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both front drop link rubbers (2.4.G.2)

Front Ball joint has slight play both rack end inner ball joints (2.2.B.1f)

Front Front wheel bearing has slight play both wheel bearings slight play (2.5.A.3c)

Front oil wetness under engine and steering rack

Front unable to see front brake pads

Nearside Front Headlamp aim too low (1.8)

Nearside Rear lens deteriorated

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mount (2.4.A.3)

Offside Front tyre inner shoulder wear

Offside Rear slight brake binding

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Play in prop-shaft centre bearing

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Play in prop-shaft centre bearing

Nearside Front Drag link end ball joint has excessive play (2.2.B.1f)

Offside Front Drag link end ball joint has excessive play (2.2.B.1f)

Offside Front Hazard warning lamps inoperative (1.4.B.1b)

Offside Rear Hazard warning lamps inoperative (1.4.B.1b)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

general corosion in a few areas

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

general corosion in a few areas

Hazard warning switch faulty (1.4.B.1d)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

fronr discs coroded

general corosion in a few areas

advise cleaning and grease protecting front flexible brake hose furrels

advise cleaning and grease protecting metal brake pipes

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater not working (1.4.A.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear rear brake grabbing severely (3.7.A.5b)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

advise cleaning and grease protecting front flexible brake hose furrels

advise cleaning and grease protecting metal brake pipes

Front Anti-roll bar synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

exhaust has a minor leak at rear of silencer

slight play front wheel bearings

O/S rear tyre 1.6mm. †N/s front tyre wearing on outer edge.