MOT Status
ExpiredMileage
102,519 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive suspension arm (5.3.6 (a) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to inner sill (5.3.6 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
engine covers under trays fiited
Nearside Front Brake pipe excessively corroded to rear (3.6.B.2c)
Offside Front Brake pipe excessively corroded to rear (3.6.B.2c)
engine covers under trays fiited
Offside Front tyre cut in tread but no cords showing
slight corrosion on both front to rear brake pipes
Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)
Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)
engine covers under trays fitted
Centre Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Centre Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp aim too high (1.8)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the MG Zt?
Based on 193,197 MOT tests across 13,994 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ02 NNZ is a 2002 MG Zt in Blue with a 2,497cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 2002 MG Zt models, the average MOT pass rate is 71.5% with a typical mileage of 70,051 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG Zt fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 9,540 recorded failures. If you're considering buying PJ02 NNZ, it's worth having these areas checked by a mechanic before committing.
The MG Zt typically stays on UK roads for around 25 years. At 24 years old, this MG Zt is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PJ02 NNZ?
You can check the full history of PJ02 NNZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ02 NNZ registered?
PJ02 NNZ is a 2002 MG Zt, first registered on 19 April 2002.
Is PJ02 NNZ safe to buy?
The MOT history for PJ02 NNZ shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ02 NNZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ02 NNZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.