MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic braking system warning device indicates a fault (1.7 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Fuel Pipe/s corroded ()
Nearside Front Play in steering rack inner joint(s) ()
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Play in steering rack inner joint(s) ()
Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Other passenger door cannot be opened from outside the vehicle sliding door (6.2.3 (a))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step and arch (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement d-bushes (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Track rod end seriously misaligned lock nut (2.1.3 (e))
Brake pipe corroded, covered in grease or other material N/O/R (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both inner sills (6.1.1 (c) (i))
Suspension component mounting prescribed area is corroded but not considered excessive N/O/R UPPER COIL SPRING MOUNTS (5.3.6 (a) (i))
brake pipes undersealed
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
brake pipes undersealed
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear coil spring corroded (2.4.C.1b)
both front inner cv boots worn
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear fog lamp not working (1.3.2b)
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Rear Exhaust has a part missing (7.1.1a)
Registration plate lamp not working (1.1.5c)
Brakes imbalanced across an axle (3.7.B.5b)
20% front brake imbalance
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ02 TMO is a 2002 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying PJ02 TMO, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PJ02 TMO?
You can check the full history of PJ02 TMO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ02 TMO registered?
PJ02 TMO is a 2002 Mercedes-benz Vito, first registered on 23 May 2002.
Is PJ02 TMO safe to buy?
The MOT history for PJ02 TMO shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ02 TMO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ02 TMO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.