2005 Mercedes-benz Clk

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn back (5.3.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play rear (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Central exhaust bracket damaged

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Centre Exhaust has a minor leak of exhaust gases with centre exhaust bracket missing but exhaust secure (7.1.2)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

covers fitted obstructing view

Centre Rear Exhaust has a minor leak of exhaust gases Link pipe cracked. Centre to rear silencer. (7.1.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Centre Rear Exhaust has a minor leak of exhaust gases Link pipe cracked. Centre to rear silencer. (7.1.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Items removed from driver's view prior to test

Front brake imbalance: 23% Front brakes only just met the front brake imbalance requirements.

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

n/s/f tyre worn on inner edge.

Tyre tread depth below requirements of 1.6mm (4.1.E.1)