MOT Status
ExpiredMileage
107,794 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Brake fluid warning lamp defective (1.1.10 (f))
Coil spring corroded all (5.3.1 (b) (i))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Rear Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Position lamp not working side light (4.2.1 (a) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working side light (4.2.1 (a) (ii))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Brake fluid warning lamp defective (1.1.10 (f))
Coil spring corroded all (5.3.1 (b) (i))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Rear Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Manufactures body under trays fitted restricting inspection of components
Manufactures sill covers fitted restricting inspection of components
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Nearside Front Position lamp not working side light (4.2.1 (a) (ii))
Offside Front Position lamp not working side light (4.2.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Manufactures body under trays fitted restricting inspection of components
Manufactures sill covers fitted restricting inspection of components
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing cracking (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Windscreen wiper blade defective (3.4 (b) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Coil spring corroded all (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge Both worn on edge (5.2.3 (e))
Manufactures body under trays fitted restricting inspection of components.
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension arm corroded but not seriously weakened All arms corroded (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake disc worn, pitted or scored, but not seriously weakened All discs (1.1.14 (a) (ii))
Coil spring corroded All springs corroded (5.3.1 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Manufactures body under trays fitted restricting inspection of components.
Manufactures sill covers fitted restricting inspection of components
Nearside Rear Brake binding but not excessively
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All arms corroded (5.3.3 (b) (i))
Tyre slightly damaged/cracking or perishing All tyres cracking (5.2.3 (d) (ii))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Brake fluid warning lamp illuminated (1.1.10 (f))
Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Brake fluid warning lamp illuminated (1.1.10 (f))
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
nearside + offside front tyres worn outside edge
How Reliable is the Mitsubishi Outlander?
Based on 726,436 MOT tests across 75,074 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ06 UTA is a 2006 Mitsubishi Outlander in Silver with a 2,378cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Mitsubishi Outlander models, the average MOT pass rate is 71.7% with a typical mileage of 65,242 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Outlander fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 4,278 recorded failures. If you're considering buying PJ06 UTA, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Outlander typically stays on UK roads for around 22 years. At 20 years old, this Mitsubishi Outlander is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PJ06 UTA?
You can check the full history of PJ06 UTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ06 UTA registered?
PJ06 UTA is a 2006 Mitsubishi Outlander, first registered on 15 May 2006.
Is PJ06 UTA safe to buy?
The MOT history for PJ06 UTA shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ06 UTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ06 UTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.