MOT Status
ExpiredMileage
145,377 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust catalytic converter obviously modified (8.2.1.1 (a))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
vehicle fitted with an under tray obscuring some components
all of front and rear suspension corroded and starting to rust.
exhaust system badly corroded but not blowing at time of test.
Offside Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Outer Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre tread wearing on inner edge
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Inner Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Front Ball joint (2.4.G.2)
Offside Rear Upper Exhaust system not adequately supported (7.1.1)
Nearside Rear Outer Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre tread wearing on inner edge
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Inner Brake pad(s) wearing thin (3.5.1g)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ07 BTU is a 2007 Mazda 6 in Red with a 1,999cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying PJ07 BTU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PJ07 BTU?
You can check the full history of PJ07 BTU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ07 BTU registered?
PJ07 BTU is a 2007 Mazda 6, first registered on 13 April 2007.
Is PJ07 BTU safe to buy?
The MOT history for PJ07 BTU shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ07 BTU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ07 BTU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.