MOT Status
ExpiredMileage
54,955 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor to sill (6.1.1 (c) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor to sill (6.1.1 (c) (i))
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel well (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor to sill (6.1.1 (c) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor to sill (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Rear Exhaust system insecure (6.1.2 (a))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
o/s/r & n /s/r tyres outer wall surface cracking
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Headlamp aim too low (1.8)
both rear tyres slightly perished
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
both rear tyres slightly perished
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ08 KWP is a 2008 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying PJ08 KWP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PJ08 KWP?
You can check the full history of PJ08 KWP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ08 KWP registered?
PJ08 KWP is a 2008 Ford Ka, first registered on 25 April 2008.
Is PJ08 KWP safe to buy?
The MOT history for PJ08 KWP shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ08 KWP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ08 KWP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.