2008 Peugeot 107

Integral body structure is corroded but structural rigidity is not significantly reduced Both inner/ outer sills (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive Rear axle corroded (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear axle mounts corroded (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust silencer insecure (8.1.1 (b) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed INNER SIDEWALL SPLIT (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorbers has light misting of oil x2 (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Shock absorbers has light misting of oil x2 (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material front to rear at the rear (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material front to rear at the rear (1.1.11 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material front to rear at the rear (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear hand brake no effort n/s/r

Offside Front Brake pipe corroded, covered in grease or other material front to rear at the rear (1.1.11 (c))

Nearside Brake pipe corroded, covered in grease or other material front to rear to flexy (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear tp flexy (1.1.11 (c))

Emissions not tested center pipe corroded / blowing . (8.2.1.2 (d))

Nearside Brake pipe corroded, covered in grease or other material front to rear to flexy (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear tp flexy (1.1.11 (c))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded o/s and n/s too front (3.6.B.2c)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Stop lamp not working (1.2.1b)

Rear Registration plate lamp not working both (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded o/s and n/s too front (3.6.B.2c)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)