MOT Status
ExpiredMileage
55,993 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Nearside Rear Nail in tyre ()
Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
brake pipes under sealed
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Nearside Rear Nail in tyre ()
Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
brake pipes under sealed
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))
Offside Front Headlamp levelling device inoperative (4.1.5 (a))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))
Nearside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mount (5.3.6 (a) (i))
Offside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut top mount (5.3.6 (a) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills (6.1.1 (c) (i))
Nearside Front Headlamp aim too far to the right (4.1.2 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Headlamp aim too far to the right (4.1.2 (a))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Hazard warning tell tale not working correctly (1.4.B.1e)
Nearside Front Headlamp aim too high and too far to the right. (1.8)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nail in nearside rear tyre
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Nail in nearside rear tyre
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
n/s/f driveshaft oil seal leaking.
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
n/s/f driveshaft oil seal leaking.
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ08 ZBO is a 2008 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying PJ08 ZBO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PJ08 ZBO?
You can check the full history of PJ08 ZBO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ08 ZBO registered?
PJ08 ZBO is a 2008 Ford Ka, first registered on 13 June 2008.
Is PJ08 ZBO safe to buy?
The MOT history for PJ08 ZBO shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ08 ZBO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ08 ZBO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.