2001 Toyota MR2

Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced inner frame (6.1.1 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced inner frame (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front suspension components corroded

rear suspension components corroded

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front suspension components corroded

rear suspension components corroded

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate insecure (0.1 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material to flex (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to flex (1.1.11 (c))

front suspension components corroded

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Offside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material to flex (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to flex (1.1.11 (c))

front suspension components corroded

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Nail in tyre ()

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Nail in tyre ()

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front tyres starting to seperate

rear nearside tyre approaching wear bars

parking brake leaver on last reserve of travel