2003 Mercedes-benz A-class

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake disc significantly and obviously worn Inner face (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly distorted.

Front Suspension arm pin or bush worn but not resulting in excessive movement front bushes (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Suspension arm pin or bush worn but not resulting in excessive movement front bushes (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Slight corrosion to brake pipes

Slight corrosion to exhaust middle silencer

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Slight corrosion to brake pipes

Slight corrosion to exhaust middle silencer

Front brake pads are 90% worn

Front tyres are 3-4mm

Rear registration plate faded but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

rear brake recording little or no effort (3.7.B.5a)

Rear registration plate faded but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

exhaust middle silencer slightly corroded

Nearside Registration plate lamp not working (1.1.C.1d)

exhaust middle silencer slightly corroded

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Stop lamp not working (1.2.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)