2006 Volkswagen Beetle

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Protective coating bubbled (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust silencer insecure (8.1.1 (b) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge All 4 worn on edges (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp missing (4.1.1 (a) (ii))

Tyre worn close to legal limit/worn on edge All 4 worn on edges (5.2.3 (e))

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)