MOT Status
ValidMileage
87,825 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))
axle surface corrosion
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Horn not working (7.7 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))
axle surface corrosion
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
front exhaust bracket deteriorated
smell of fuel at rear but no sign of leaks
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
front exhaust bracket deteriorated
smell of fuel at rear but no sign of leaks
Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Horn not working (7.7 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both headlamp lenses becoming opaque (4.1.4 (b))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both headlamp lenses becoming opaque (4.1.4 (b))
Horn not working Horn in/op (7.7 (a))
Offside Front Position lamp not working Bulb blown (4.2.1 (a) (ii))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Exhaust has a major leak of exhaust gases manifold area (6.1.2 (a))
Rear Exhaust noisy (8.1.1 (a))
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PJ57 ZBC is a 2008 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2008 Peugeot 107 models, the average MOT pass rate is 74.1% with a typical mileage of 54,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying PJ57 ZBC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 18 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PJ57 ZBC?
You can check the full history of PJ57 ZBC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PJ57 ZBC registered?
PJ57 ZBC is a 2008 Peugeot 107, first registered on 2 January 2008.
Is PJ57 ZBC safe to buy?
The MOT history for PJ57 ZBC shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PJ57 ZBC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PJ57 ZBC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.