2003 Nissan Navara

Fuel tank leaking (6.1.3 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened Upper suspension arm rear mounting (5.3.3 (b) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear chassis (6.2.2 (d) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NSR Inner sill (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OSF Wheel arch (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OSR Inner sill (6.1.1 (c) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front anti roll bar linkages worn (5.3.4 (a) (i))

Both rear shock absorbers corroded

Exhaust mounting defective Exhaust mounting defective rear (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge Worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Under vehicle covered in underseal

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Shock absorbers has slight external damage to the casing casing (5.3.2 (b))

general under body wear

under seal applied

Rear Brake pipe corroded, covered in grease or other material to load valve (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear outrigger (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

heavy surface corrosion to chassis and suspension components

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

heavy surface corrosion to chassis and suspension components

heavy surface corrosion to underside

Brake pipe slightly corroded rear at load valve (3.6.B.2c)

Brake pipe slightly corroded rear at load valve (3.6.B.2c)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

heavy surface corrosion to underside

Rear Brake pipe slightly corroded (3.6.B.2c)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

heavy surface corrosion to underside not excessive at this time

Brake pipe excessively corroded (3.6.B.2c)

Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front position lamp(s) not working (1.1.A.3b)

heavy surface corrosion to underside not excessive at this time

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear rear brake binding (3.7.B.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)