2011 Honda Cbf 125

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Rear Brake component insecure NUT LOSE NO SPLIT PIN (1.1.21 (c))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Horn not working (7.7 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Front position lamp missing bulb missing. (1.1.1a)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Handlebar deformed (2.1.1b)

Rear Plate brake test indicates a binding brake (3.3.B1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Plate brake test indicates a slightly grabbing brake (3.3.B1b)