2001 Toyota Yaris

Front Steering linkage ball joint has slight play inner tie rod both sides (2.1.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear underbody corroded

Front Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Steering linkage ball joint has slight play inner tie rod both sides (2.1.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear underbody corroded

Nearside Front Tyre worn close to legal limit/worn on edge also cracking on side wall. (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive seal near axel bush (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge also cracking on side wall. (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive seal near axel bush (5.3.6 (a) (i))

Rear Service brake lagging in operation (1.2.1 (d))

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge also cracking on side wall. (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive seal near axel bush (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge also cracking on side wall. (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive seal near axel bush (5.3.6 (a) (i))

All metal brake pipes have surface corrosion

Both inner sills corroded close to limits at rear

Exhaust has a slight blow of exhaust gases from manifold.

Front anti roll bar link bushes deteriorated close to limits.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Axle mounts (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded axle mounting (2.4.A.3)

All metal brake pipes have surface corrosion

Both inner sills corroded close to limits at rear

Exhaust has a slight blow of exhaust gases from manifold.

Front anti roll bar link bushes deteriorated close to limits.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle area (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle area (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate faded but not likely to be misread (6.3.1d)

n/s/r and o/s/r sills on inside near rear jacking points has corroded.

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate faded but not likely to be misread (6.3.1d)

n/s/r and o/s/r sills on inside near rear jacking points has corroded.

general under body rust

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust centre and rear corroded,o/s/ head light len cracked but beam pattern ok.

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

slight blow on rear exhaust box centre corroded ,front and brake pipes corroded.advise grease up .anti roll bar rubbers pershed on drop links to lower arm.

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Registration plate lamp not working (1.1.C.1d)

slight blow on rear exhaust box centre corroded ,front and brake pipes corroded.advise grease up .anti roll bar rubbers pershed on drop links to lower arm.

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Shock absorber has negligible damping effect (2.7.5) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

exhaust system poor. o/s/r/ hub bearing slight noise

Rear Brake load sensing valve linkage stiff (3.6.E.3)

exhaust system poor. o/s/r/ hub bearing slight noise

Nearside Headlamp aim too high (1.8)

slight noise o/s/r hub

slight noise o/s/r hub

n/s wiper split on end (still clearing screen)