MOT Status
ExpiredMileage
101,510 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Headlamp lens seriously defective both (4.1.1 (b) (ii))
Headlamp light intensity severely reduced both (4.1.4 (a))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Direction indicator slightly discoloured (4.4.3 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))
Front Direction indicator slightly discoloured both (4.4.3 (a))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all bushes worn (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp lens seriously defective both (4.1.1 (b) (ii))
Rear Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Direction indicator slightly discoloured both (4.4.3 (a))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all bushes worn (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement pair (5.3.4 (a) (i))
rear subframe corroded
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear suspension and subframe corroded.
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front front brake excessively fluctuating (3.7.B.3)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear suspension and subframe corroded.
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear rear exhaust bracket broken
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc inner cv gaiter (2.5.C.1a)
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc inner cv gaiter (2.5.C.1a)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear rear exhaust bracket broken
both rear tyres getting low on tread depth
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
both rear tyres getting low on tread depth
Nearside Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
both front tyres badly worn on inner edge
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
both front tyres badly worn on inner edge
washer bottle lid missing
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
washer bottle lid missing
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
both front brake discs corroded
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
both front brake discs corroded
nearside front tyre worn on inner edge
offside front tyre worn on inner edge
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PK56 KWY is a 2006 Ford Focus C-max in Silver with a 1,999cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2006 Ford Focus C-max models, the average MOT pass rate is 73.4% with a typical mileage of 70,386 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying PK56 KWY, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 20 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PK56 KWY?
You can check the full history of PK56 KWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PK56 KWY registered?
PK56 KWY is a 2006 Ford Focus C-max, first registered on 17 October 2006.
Is PK56 KWY safe to buy?
The MOT history for PK56 KWY shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PK56 KWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PK56 KWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.