2012 BMW 116

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive upper/ lower engine area (8.4.1 (a) (i))

Rear Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

air intake breather pipe deteriorated

front & rear suspension's including front & rear subframe's and rear differential are corroded

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive upper/ lower engine area (8.4.1 (a) (i))

Rear Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

air intake breather pipe deteriorated

front & rear suspension's including front & rear subframe's and rear differential are corroded

Front brakes slight uneven application

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear reverse lights not working

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both x2 (4.7.1 (b) (ii))

Front brakes slight uneven application

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge (5.2.3 (e))

Rear reverse lights not working

smoke test to low to detect

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension component ball joint excessively worn o/s/f front lower ball joint nut facing down (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt plus slight play in the joint (2.1.3 (g) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge n/s/r tyre on 2mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge o/s/r tyre on 1.6mm (5.2.3 (e))

smoke test to low to detect

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Reversing lamp inoperative (4.6.1 (a))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Play in steering rack inner joint(s) ()

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Headlamp light source and lamp not compatible both (4.1.4 (c))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Registration plate does not conform to the specified requirements both (0.1 (d))

Offside Front Play in steering rack inner joint(s) ()

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Rear Registration plate does not conform to the specified requirements (0.1 (d))