2006 Toyota Aygo

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Outer Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Offside Front Outer Tyre slightly damaged (5.2.3 (d) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

weld repairs undersealed

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Outer Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Offside Front Outer Tyre slightly damaged (5.2.3 (d) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

weld repairs undersealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both inner and outer sills corroded and damaged

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged side wall at wheel trim (5.2.3 (d) (ii))

Nearside inner and outer sills corroded and damaged

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside inner and outer sills corroded

engine management light illuminated

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Suspension component ball joint likely to become detached no locking pin (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Steering locking device missing track rod end (2.1.3 (d))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Steering locking device missing track rod end (2.1.3 (d))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component ball joint likely to become detached no locking pin (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm 155/65/14 (5.2.3 (e)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Body component slightly loose sill damaged (6.2.1 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))

underside coroded

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Obligatory mirror slightly damaged interior (3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Windscreen washer not working (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Obligatory mirror slightly damaged interior (3.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Headlamp aim too low (1.8)

Nearside Rear Brake pipe leaking (3.6.A.1)

Offside Headlamp aim too low (1.8)

Offside Rear Brake pipe leaking (3.6.A.1)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

front wiper torn

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

front wiper torn