2003 Honda VT125C

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Drive chain slightly loose (6.2.1d)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front suspension has slight distortion (2.3.8)

Handlebar slightly corroded. (2.1.1b)

Drive chain excessively loose (6.2.1d)

Rear Brake locking device missing (3.2.A1e)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Stop lamp remains on when the brake is released (1.3.1e)

Front suspension has slight distortion (2.3.8)

Handlebar slightly corroded. (2.1.1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel spoke slightly bent. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

nearside chain adjuster broken

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel spoke slightly bent. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

Drive chain excessively loose (6.2.1d)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim beam image kick up to the offside (1.6)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Headlamp aim beam image kick up to the offside (1.6)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)