MOT Status
ValidMileage
40,584 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
corrosion noted on front subframe and suspension components
Rear Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
corrosion noted on front subframe and suspension components
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
corrosion noted on front sub frame and suspension components
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength w/arch (5.3.6 (a) (i))
Slight corrosion. Near side front inner wheel arch near jacking point.
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Front Bonnet cannot be secured in the closed position (3.1 (b) (i))
Front Windscreen wiper does not clear the windscreen effectively all 3 (3.4 (b) (ii))
Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Outline marker lamp not working (4.2.1 (a) (ii))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Brake pipe slightly damaged (1.1.11 (c))
Offside Rear Outline marker lamp slightly affected by the operation of another lamp (4.2.3 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sub frame (6.1.1 (c) (i))
Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Central Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Brake pipe corroded, covered in grease or other material Several metal pipes corroded (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Ball joint cover in poor condition
Offside Front Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Brake pipe corroded, covered in grease or other material Several metal pipes corroded (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Ball joint cover in poor condition
Offside Front Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe slightly corroded Metal pipes. Front to Rear (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Oil leak ()
Offside Front Power steering ram(s) has slight seepage from a component (2.3.3b)
Rear Vehicle structure has slight corrosion Chassis extension lower edges corroded (6.1.A.1)
Vehicle battery defective
Central Front Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested Exhaust broken (7.4.B.1)
Offside front brake binding (3.7.B.1)
Brake pipe slightly corroded Metal pipes. Front to Rear (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Oil leak ()
Offside Front Power steering ram(s) has slight seepage from a component (2.3.3b)
Rear Vehicle structure has slight corrosion Chassis extension lower edges corroded (6.1.A.1)
Offside Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Power steering ram(s) has slight seepage from a component (2.3.3b)
exhaust system corroded
Centre Stop lamp not working (1.2.1b)
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
offside marker light inoperative
offside rear brakes binding slightly
(1)Front tyres worn on inner edges. (2)Front brakes binding when turned by hand. (3)Wiper blades starting to split. (4)Some exhaust mounts in poor condition. (5)Slight fluid leak OS steering rack.
Exhaust has part of the system slightly deteriorated (7.1.1a)
oil leak from engine
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Headlamp aim too low and too far to the left. (1.8)
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
one of the bulbs in the top stop lamp not working
one of the bulbs in the top stop lamp not working
How Reliable is the Fiat Hymer?
Based on 25,281 MOT tests across 1,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PL03 HKW is a 2003 Fiat Hymer in White with a 2,800cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 69%.
Across all 2003 Fiat Hymer models, the average MOT pass rate is 75.9% with a typical mileage of 48,875 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Hymer fails its MOT is headlamp aim beam image kick up to the offside, accounting for 531 recorded failures. If you're considering buying PL03 HKW, it's worth having these areas checked by a mechanic before committing.
The Fiat Hymer typically stays on UK roads for around 40 years. At 23 years old, this Fiat Hymer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PL03 HKW?
You can check the full history of PL03 HKW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PL03 HKW registered?
PL03 HKW is a 2003 Fiat Hymer, first registered on 24 July 2003.
Is PL03 HKW safe to buy?
The MOT history for PL03 HKW shows 29 tests with a 69% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PL03 HKW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PL03 HKW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.