2003 Daihatsu Terios

Front Exhaust has a major leak of exhaust gases Leaking from joint (6.1.2 (a))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively Both blades (3.4 (b) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer wheel arch (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre worn close to legal limit/worn on edge Tread depth is 2.7 mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive centre chassis (5.3.6 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/inner sill (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected nearside centre inner face of chassis (5.3.6 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive centre chassis (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Fuel hose corroded tank filler (6.1.3 (c) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced gearbox crossmember mount area (6.1.1 (c) (i))

Nearside Windscreen damaged but not adversely affecting driver's view swept area (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced gearbox crossmember area (6.1.1 (c) (i))

Slight leak of gas on exhaust

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps both (4.7.2 (a))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Fuel hose corroded tank filler (6.1.3 (c) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced gearbox crossmember mount area (6.1.1 (c) (i))

Nearside Windscreen damaged but not adversely affecting driver's view swept area (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced gearbox crossmember area (6.1.1 (c) (i))

Slight leak of gas on exhaust

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)