2003 BMW X5

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear All direction indicators slightly discoloured (4.4.3 (a))

Rear Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear All direction indicators slightly discoloured (4.4.3 (a))

Rear Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

engine cover fitted

under tray fitted

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

engine cover fitted

under tray fitted

Rear All direction indicators slightly discoloured (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

undertrays fitted

Sub-frame pin or bush excessively worn ALL (5.3.4 (a) (i))

Rear All direction indicators slightly discoloured (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

undertrays fitted

Both front tyres - treads cracked

Nearside Rear Tyre tread cracked

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)