MOT Status
ValidMileage
129,069 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))
Nearside Rear Subframe mounting prescribed area is inadequately repaired inner and outer sill not joined together (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim unable to be tested (4.1.2 (b))
Offside Rear Subframe mounting prescribed area is inadequately repaired inner and outer sill not joined together (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive floorpan, inner and outer sills (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive floorpan, inner and outer sills (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake pipe excessively corroded front to rear pipe at rear flexi (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive floorpan, inner and outer sills (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive floorpan, inner and outer sills (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement Both nearside and offside (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive both nearside and offside mounting areas (5.3.6 (a) (i))
Emissions unable to be completed due to condition of exhaust (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases Back box to centre section joint (6.1.2 (a))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement Both nearside and offside (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive both nearside and offside mounting areas (5.3.6 (a) (i))
Steering wheel cover slips and moves independently of the wheel, effecting control of the vehicle
Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Brake pipe excessively corroded to front (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
n/s rear tyre cracking in tread
o/s front tyre cracking in tread
o/s rear tyre cracking in tread
rear exhaust joint loose
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Both rear brakes slightly binding
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PL08 AEP is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying PL08 AEP, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PL08 AEP?
You can check the full history of PL08 AEP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PL08 AEP registered?
PL08 AEP is a 2008 Toyota Aygo, first registered on 17 June 2008.
Is PL08 AEP safe to buy?
The MOT history for PL08 AEP shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PL08 AEP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PL08 AEP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.