2016 Yamaha Wr

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake master cylinder slightly loose Mounting damaged (1.1.10 (c))

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Position lamp light intensity obviously reduced Not working (4.2.3 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Gear lever bent

Nearside Rear Direction indicator lens defective which has no effect on emitted light Missing (4.4.1 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake master cylinder slightly loose Mounting damaged (1.1.10 (c))

Front Direction indicator insecure Both cable tied (4.4.1 (c) (i))

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Position lamp light intensity obviously reduced Not working (4.2.3 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Gear lever bent

Nearside Rear Direction indicator lens defective which has no effect on emitted light Missing (4.4.1 (b) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

front tyre flat

Drive chain slightly loose (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))