2005 Fiat Ducato

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))

Items removed from driver's view prior to test

general condition of vehicle underneath is corroded

powering steering pipes corroded

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Nail in tyre

Offside Front Windscreen wiper blade defective leaving lines on glass in 2 areas (3.4 (b) (i))

as expected underbody condition for age

Central Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Central Front exhaust outer skin corroded

Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced surface corrosion adjacent to jacking points, o/s inner arch and front chassis legs (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Offside Front inner wheel arch corroded but not holed

both rear tyres cracking on outer sidewalls

exhaust back box deteriorated

Nearside Front Brake hose ferrule excessively corroded Both (1.1.12 (f) (i))

Offside Front Brake hose ferrule excessively corroded Both (1.1.12 (f) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Items removed from driver's view prior to test

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch and inner chassis rail areas (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2.4mm (5.2.3 (e))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch and inner chassis rail areas (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 2.6mm (5.2.3 (e))

The exhaust mounting rubbers are deteriorated

The offside rear marker lens is damaged

The rear exhaust box is corroded

Central Items removed from driver's view prior to test mirror

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

exhaust in poor condition

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Central Stop lamp not working (1.2.1b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened rust marks (3.5.1i)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

both rear tyres have slight cracking on the walls

Nearside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear fog lamp not working (1.3.2b)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Both rear brakes starting to bind